# nand info Device 0: nandmulti, C revision NAND 4GiB MT29F32G-C sector size 2048 KiB Amlogic nand flash uboot driver for M3, Version 1.1 (c) 2010 Amlogic Inc. No NAND device found!!! NAND device id: 2c 68 4 4a a9 0 NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron C revision NAND 4GiB MT29F32G-C) 1 NAND chips detected #####aml_nand_init, with RB pins and chip->chip_delay:20 bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.3ns oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH30_1K_MODE aml nand env valid addr: e000 mtd parttion 1 offset c00000 changed to 800000 mtd parttion 2 offset 1c00000 changed to 1800000 mtd parttion 3 offset 2c00000 changed to 2800000 mtd parttion 4 offset 4000000 changed to 3c00000 mtd parttion 5 offset 24000000 changed to 23c00000 mtd parttion 6 offset 30000000 changed to 2fc00000 mtd parttion 7 offset ffffffffffffffff changed to 4fc00000 Creating 7 MTD partitions on "nandmulti": 0x000000800000-0x000001800000 : "aml_logo" 0x000001800000-0x000002800000 : "recovery" 0x000002800000-0x000003c00000 : "boot" 0x000003c00000-0x000023c00000 : "system" 0x000023c00000-0x00002fc00000 : "cache" 0x00002fc00000-0x00004fc00000 : "userdata" 0x00004fc00000-0x000100000000 : "NFTL_Part" nandmulti initialized ok
dev: size erasesize name mtd0: 01000000 00200000 "aml_logo" mtd1: 01000000 00200000 "recovery" mtd2: 01400000 00200000 "boot" mtd3: 20000000 00200000 "system" mtd4: 0c000000 00200000 "cache" mtd5: 20000000 00200000 "userdata" mtd6: b0400000 00200000 "NFTL_Part" mtd7: 00002000 00001000 "ubootenv" mtd8: 00002000 00001000 "hashtable" mtd9: 00400000 00001000 "ubootwhole"
dev: size erasesize name mtd0: 01000000 00200000 "aml_logo" mtd1: 01000000 00200000 "recovery" mtd2: 01400000 00200000 "boot" mtd3: 20000000 00200000 "system" mtd4: 0c000000 00200000 "cache" mtd5: 20000000 00200000 "userdata" mtd6: b0400000 00200000 "NFTL_Part" mtd7: 00060000 00001000 "bootloader" mtd8: 00002000 00001000 "ubootenv" mtd9: 00002000 00001000 "hashtable"